How To Create Uefi Bootable Iso Image Windows 7

In this article you volition detect information about how you lot can create a Windows UEFI Kick-Stick in Windows.

At that place are several unlike ways to get a bootable Windows image on a USB flash drive and then install it in UEFI mode.

1st Method: Rufus

The beginning method mentioned in this commodity is to create a bootable flash drive with Rufus.

Download and execute Rufus

Rufus is an open source plan licensed under the GPL.^[one] Rufus tin be downloaded straight from the programmer's website. The programme does non need to be installed, it tin can be executed simply.

Hint: Rufus is the preferred tool to create a bootable GPT partitioned and NTFS formatted USB bulldoze if the install.wim is larger than 4 GB.

Create UEFI USB flash drive

To create a UEFI bootable Windows installation flash drive with Rufus, you have to make the following settings:

• Drive: Select the USB flash drive yous want to use
• Partitioning scheme: Select GPT Segmentation scheme for UEFI hither
• File organisation: Hither yous have to select NTFS
• Create a bootable drive with ISO image: Select the corresponding Windows ISO
• Create extended clarification and symbols: Tick this box

The UEFI USB stick is automatically created by clicking Outset.

2nd Method: Windows USB/DVD Download Tool

The second method is to use the Windows USB/DVD Download Tool.

Download and install

First of all, the Windows USB/DVD Download Tool^[2] has to exist downloaded, east.g. from Codeplex.

Afterwards you lot can simply install the downloaded .exe file. The Cyberspace Framework 2.0 must be installed in guild to install this tool.

Create UEFI USB wink bulldoze

To create a UEFI USB wink drive, open the installed Windows tool.

• 

  1. Select the Windows image that you want to re-create to the USB flash drive.

• 

  two. Select USB device to create a UEFI USB flash bulldoze.

• 

  3. At present select the appropriate USB wink drive and outset the copying procedure by clicking Begin copying.

third Method: Diskpart

The third method to create a bootable usb bulldoze is diskpart.

Preparing the USB Stick

A new master partition is created on the USB flash drive, formatted with the FAT32 file arrangement and assigned a drive letter.

To exercise this, execute the following commands:

diskpart list deejay select disk # clean create partition main select partition 1 active format quick fs=fat32 assign exit        

Copy Windows installation files to the USB flash drive

The adjacent stride is to copy the Windows installation files to the USB wink drive.

You tin do this by simply using Copy - Paste. It doesn't matter whether you lot have mounted, unpacked or inserted an ISO paradigm in Windows or an installation DVD.

If the install.wim file of the Windows image is larger than 4GB, an error will occur during the copying procedure. At the end of the copy process, the message that the file is too large appears. This message appears, because the FAT32 file arrangement reaches its limits and cannot procedure >4GB files.

In order to finish the UEFI-USB-Stick you lot have to utilise a piffling play a trick on:

Using DISM, the file must be split into two or more <4GB files. Delight notation that this process is only possible upwardly to Windows 7 or Windows Server 2008.^{[three] [4]}

Simply enter the following command:

Dism /Separate-Image /ImageFile:Due east:\sources\install.wim /SWMFile:C:\Users\Administrator\Desktop\install.swm /FileSize:3000

• /ImageFile: Path of the source file install.wim in the sources folder of the Windows ISO
• /SWMFile: Path of the carve up target files
• /FileSize: Maximum size of dissever target files in MB

Now you tin re-create the split install.wim, install2.wim, install3.wim etc. to the USB stick in the "sources" directory.

Fix error message status 0xc000000d

If y'all get the error message \EFI\Microsoft\BOOT\\\\BCD Status 0xc000000d when booting the USB stick, please bank check the following things:

1. If it'southward a arrangement with Secure Boot, conciliate Secure Boot.
2. Select the USB stick (non Windows Kicking Managing director) from the boot menu.

Booting should work afterwards.

Einzelnachweise

1. ↑ Rufus Website (akeo.ie)
2. ↑ Windows USB/DVD Download Tool (microsoft. com)
3. ↑ Split a Windows Image (WIM) (www.technet.microsoft.com)
4. ↑ Split a Windows image file (.wim) (www.docs.microsoft.com)

Writer: Armin Oberneder Armin Oberneder has been working for Thomas-Krenn.AG for over 7 years now. He is currently employed in the consulting team and thus takes care of all customer-specific inquiries concerning servers, storage, virtualization and networks. In the past years Armin has specialized in Windows Server, Software-Defined-Technologies and Network Engineering. Due to these specializations, he also ensures that our customers are helped as quickly as possible in the event of problems by means of a ticket system, by telephone or in writing via email.

Source: https://www.thomas-krenn.com/en/wiki/Creating_Windows_UEFI_Boot-Stick_in_Windows

Posted by: fishersweeme.blogspot.com

Share this post